The ISIS User Group Conference held in Bristol on 11th November was a huge success. It was very well attended and it was good to see the ISIS community together again! This page contains some of the resources of the day.
Programme
| 9.30 - 10.00 | Registration and refreshments |
| 10.00 - 10.05 | Welcome from hosts - Clive Onions, Ove Arup & Partners |
| 10.05 - 10.10 | Introduction by Chair - Chris Whitlow, Edenvale Young |
| 10.10 - 10.30 | Experiences in urban flood modelling - Maria Jarquin, Edenvale Young |
| 10.30 - 10.50 | New features and improvements in ISIS v3.3 - Konrad Adams, Halcrow |
| 10.50 - 11.10 | Conveyance Estimation System (CES) - Jennifer Chlebek, Ove Arup & Partners |
| 11.10 - 11.30 | Difference between ISIS 2D and TUFLOW - Matt Horritt, Halcrow |
| 11.30 - 11.50 | ISIS modelling of the Leigh Barrier - John Heald, Mott MacDonald |
| 12.00 - 13.00 | Lunch |
| 13.00 - 13.20 | Environment Agency modelling strategy - Helen James, Environment Agency |
| 13.20 - 13.40 | Modelling culverted watercourse systems - Heather Taylor, Hyder Consulting |
| 13.40 - 14.00 | Scenario analysis using ISIS in China - Edward Evans, Independent Consultant |
| 14.00 - 15.00 | Open forum - Jon Wicks, Halcrow |
Presentation downloads
| File description | File size |
Uploaded |
Downloads |
||
 |
ISIS2D and TUFLOW: What's the difference? Presentation by Matt Horrit on the differences between ISIS2D and TUFLOW |
6.77 Mb |
19/11/2009 |
430 |
|
|
Hec-RAS - ISIS Models Comparison Presentation by Maria Jarquin on experiences in modelling flood processes in a heavily urbanised area in central Birmingham |
6.26 Mb |
19/11/2009 |
355 |
|
|
Presentation by Konrad Adams on the new features of ISIS v3.3 |
2.88 Mb |
19/11/2009 |
129 |
|
|
Data, Modelling and Mapping Strategies 2010-2015 Presentation by Kate Marks on the EA's data, modelling and mapping strategies |
0.84 Mb |
19/11/2009 |
198 |
|
|
Application of the Conveyance Estimation System for river modelling Presentation by Jenny Chlebek on the Conveyance Estimation System |
6.01 Mb |
19/11/2009 |
173 |
Ideas generated in the open forum
There were a number of ideas generated in the open forum and these have been entered into the Ideas Lab. Please consider each of their merits and comment / vote if you would like to see this feature developed in ISIS.
|
Automated visualiser file building Have an automated gxy/ixy schematic layout, rather than placing the units in a long line ... |
Model file comparison tool Have a compare models function. Using a typical text-based comparison tool (such as ... |
|
Manually prescribed varying timestep As opposed to automatic adaptive timestepping, to allow the timestep to change over a ... |
2D Adaptive timestep Add adaptive timestep to ISIS 2D this should help speed up the models through its ... |
|
Close animation plot from simulation If a long section animation is open, and you start a new run, it will fail due to the ... |
Spills to automatically follow interpolate units When adding interpolates, either by a proposed automated means, or manually, the spill ... |
|
Automatic interpolation To be able to automatically add interpolate units based on some user-specified criteria ... |
Easier edit of initial conditions Be able to manually change initial conditions levels. This could be from a long section ... |
|
Derive routing sections from DTM To be able to generate reach averaged flow routing parameters from a digital terrain ... |
Extract bank levels Make it easy to extract the levels which are marked as left and right bank top (e.g. via ... |
|
More global edits Add a global edit on more quantities, e.g. spill crest level (to assist uncertainty ... |
Freeboard calculation function Add functionality to ISIS to assist in calculating the freeboard based on methods ... |
|
Bulk edit data files A tool to bulk edit ISIS data files. This could have uses in uncertainty modelling, or ... |
Force mode in culvert inlet To alleviate some of the perceived unrealistic losses in culvert inlet units, often ... |
|
More types in culvert inlet wizard Update the culvert inlet wizard to include more types of inlet (cf Hydraulic Design of ... |
Global edit for deactivation markers Have a global edit function for the Deactivation markers. This could be one or more ... |
Photos of the day
Previous conferences
For more information on our previous conferences, please visit the pages below.
Speaking at the User Conference
Do you have an interesting application of ISIS on a project or in research? If you do, contact us at if you would like to speak about it at the next User Conference.