Forum | *.sed file | isisuser.com

You are in the forum topic » *.sed file

If this is your first visit, be sure to check out the forum rules. You need to register and be logged in before you can post. Go to the forum area 'General ' or to the 'top level forum'

Quickview

Author

Thread

An C.

Member

Location:
Registered: 16/02/2009

*.sed file
Hi all,

It is said that to active Sediment Transport Module, *.sed must be present. However, I cannot find anywhere in User Manuals to tell us where the *.sed file should be present.

Anyone can help?

Thanks a lot!

Andy

16/02/2009 10:51

Link - Ip: Logged - Quote:

Richard_Measures

Member

Location:
Registered: 16/02/2009 Warnings: 0

The *.sed file has to be in the same location as the .dat file I think (I have just looked at some sediment modelling I did last year and the .dat .sed and .ief files are all in the same folder).

the *.sed file needs to hace the same filename as the *.dat file

Richard

18/02/2009 16:23

Link - Ip: Logged - Quote:

Quick reply

You need to login before you can post.
If you are not registered on the site, register here.

Latest forum posts

» increasing dflood causes ...
» ISIS Mapper for TUFLOW ...
» Blockage unit
» Back flow at downstream ...
» ISIS v3.4 - Images not ...
» Importing Survey/Cross ...
» Importing Survey/Cross ...
» Blockage
» Orifice Linearisation ...
» ISIS Version 3.4 Beta

Forum topic area

You are in the forum topic » *.sed file

Latest forum posts

Quick search

RSS Forum Feed